Tools : Calculation tools
> Units converter
constructalia.com:
Free
downloadable design softwares for steel solutions
- New! ArcelorMittal Angelina v1.01, Software that facilitates
the design of ANGELINA beams according to the principles of the Eurocodes.
- FRACOF v.014, Software for Composite Floor Slabs
- ArcelorMittal AFCB v3.08 : Composite Beam Fire Design
- ArcelorMittal Portal v1.0, Software for the predesign of
single span portal frames according to Eurocodes 3 [1].
- AcoBri v 3.01, Preliminary design software for composite
road-, railway- and footbridges.
- INerd 1.0.0 - Software to avoid the collapse of buildings
in seismic situation by simulate the inclusion of steel reinforcing
bars on the pillars of support.
- ArcelorMittal AFCC v 3.06 : Composite Column Fire Design
- ArcelorMittal PSL v 1.02, Preliminary design of steel or
composite structures according to Eurocode 3 [1] for steel structures
and Eurocode 4 [2] for composite structures.
- ArcelorMittal OZone v 2.2.6, Software to evaluate the temperature
development of the gases within a compartment during the course of
a fire according to EN 1991-1-2 and corresponding steel temperature
according to EN 1993-1-2
- ArcelorMittal LUCA, software accompanying a design guide
for industrial halls in fire conditions.
- ArcelorMittal ACoP v 1.02 : Design software to analyse and
verificate joint configuration and connections in steel structures.
- ArcelorMittal AIFB v 5.31 : SlimFloor, software developed
for the design according to Eurocode 3 of slimfloor slabs based on
Integrated Floor Beam (IFB) sections, which are composed from a split-up
wide-flange section and a plate welded as bottom or top flange.
- ArcelorMittal ABC v2.11 : Beams Calculator: design and calculations
of composite beams and non composite beams according to Eurocodes
[1 to 5].
- Prosheet 2.2: Preliminary Sheet Pile design software for
cantilever and anchored wall systems according to the Blum theory.
- Lexicon v07 (PC only): A lexicon of 4 000 technical terms
used in steel construction in nine languages
- ArcelorMittal ACD version 3.06 : Composite Column Design:
design of composite columns, composed of steel profiles, concrete
and rebars, according to Eurocode 4 [1.1] (ENV 1994-1-1).
- ArcelorMittal ACB+ v2.02 : Cellular beams design program
to optimise spans and usable ceiling height.
- CAD Downloads (DWG-Files) - Sheet piles (compatible with
AutoCAD 2005 and above).
- CAD Downloads (DXF-Files) - Sheet piles
Link: www.constructalia.com
Corus, Design software
A comprehensive suite of free software programs dedicated to providing
assistance in the design of steel intensive buildings.
- Installed standalone Corus sections interactive 'blue book',
It includes information on the Advance®, Celsius® and Hybox®
range of sections in accordance with BS EN 1993-1-1 as well as BS
5950-1:2000.
- SIDS2 - Slim Flor Integrated Design Software designs and
analyses flooring solutions utilising both SlimFlor® Fabricated
Beams (SFB) and Asymmetric SlimFlor Beams (ASB) ®.
- BDES for Advance sections designs and analyses composite
and non-composite beams under distributed and/or point loading.
- Comdek version 8.3, analyses deep (SD225 and CF210) and shallow
(CF46, CF51, CF60, CF80 and CF100) decks in composite floor construction
under a wide range of loading configurations.
- TSLAB is software to be used in conjunction with the Steel
Construction Institute’s publications, Fire Safe Design: A New
Approach to Multi-Storey Steel-Framed Buildings (Second edition),
SCI P288 and TSLAB V3.0 User Guidance and Engineering Update SCI P390.
The software calculates the load bearing capacity of composite slabs
in fire. The use of the software is described in P390 and the use
of the software without reference to this publication is not recommended.
- RHS Slimflor has been superseded by SlimFlor Integrated Design
Software (SIDS).
- ASB Slimflor has been superseded by SlimFlor Integrated Design
Software (SIDS).
- Slimflor has been superseded by SlimFlor Integrated Design
Software (SIDS).
Link: www.corusconstruction.com
Frames:
• On acierconstruction.com you can download a predesigning tool
working with Excel that unables you make a draft of simple structural
elements using HEA, HEB, or IPE sections.
Language : french
Web : http://www.acierconstruction.com/outils/
Infosteel.be
Residential steel frame structural design with BuildSoft
Language : french and Flemish
>
www.infosteel.be
Ruukki´s Software Toolbox
Tools for professional designers
Free downloads: To make both Architectural and Structural Design
work easier with accurate product information in 3D form, Ruukki offers
a selection of free CAD / BIM-objects and tool sets developed as add-ons
for professional designing software such as ArchiCAD and Tekla Structures.
- Facade Claddings and Roofing - Free
- Windows - Languages: Finnish, English
The object library contains Ruukki´s Façade Cladding
products such as Rain screen panels (RSP), Cladding lamellas and Design
profiles as well as Profiled sheets, it also includes Ruukki´s
Roofing products such as standing seam sheets, profiled sheets, tile
sheets and flashings, the Load bearing sheets plus Ruukki´s
color and coating material selection.
- Ruukki profiles TS 15.0 for Finland area - Free
- Windows - Languages: English
includes façade and wall products, roof products, frame products
- Ruukki pile components for TS 15.0 - Free
- Windows - Languages: English
includes steel pile foundation component, steel pile components, Excel
report
- Ruukki pile components for TS 16.0 - Free
- Windows - Languages: English
includes steel pile foundation component, steel pile components, Excel
report
Sofware licenses: To help Structural Engineers to find the best
possible design solution and the most feasible products with ease and
efficiency, Ruukki offers a set of design software. These software enable
cost and structural optimisation and the creation of the required documentation.
- Composite beam design software - ComBeam - 29,90€ -
Windows - Languages: Finnish, English
Software that includes support for I, box, and folded-upwards open
U composite beam sections
Software enabling capacity verifications for the following design
situations: erection (casting), service limit state, ultimate limit
state, and structural fire design.
- Composite slab design software - ComSlab - 29,90€ -
Windows - Languages: Finnish, English, Polish
Software for use as a design tool for Ruukki´s SteelComp composite
slabs
Software that enables capacity verifications for the following design
situations: erection (casting), service limit state, ultimate limit
state, and structural fire design
- Composite column design software - ComCol - 29,90€ -
Windows - Languages: Finnish, English
Software for composite column design and cost optimisation - the software
can be used for concrete and composite column design
Software enabling capacity verifications for the following design
situations: erection (casting), service limit state, ultimate limit
state, and structural fire design
- Load bearing sheet design software - Poimu - 29,90€
- Windows - The software is intended to be operated by civil/structural
engineers or otherwise adequately qualified persons - Languages: Finnish,
English, Swedish, Polish, Czech, Slovak, Hungary, Romanian, Russia
Software used for design of load bearing profiles produced by Ruukki
Software that includes two interfaces: ‘Full designer version´
for detailed design and a simplified ‘Easy and quick pre-selection
version’ for fast product selection and optimisation
Tools for contractors and purchasing
Sofware licenses: For fast product pre-selection and optimisation,
to get the right product for the right need, Ruukki offers simplified
´Easy and quick pre-selection` software for Load bearing sheets,
Light weight purlins and Sandwich panels and liner trays. These software
tools can be found under the category “Envelope and Deck Quick
Pre-Selection Software”.
- Load bearing sheet - Pre-selection software - 29,90€
- Windows - Languages: Finnish, English, Swedish, Polish, Czech, Slovak,
Hungary, Romanian, Russia
Software used for pre-selection of load bearing profiles produced
by Ruukki, developed for the use of PURCHASING and SALES PERSONNEL
who are not professional building designers.
- Light weight purlin - Pre-selection software - 29,90€
- Windows - Languages: Finnish, English, Swedish, Polish, Czech, Slovak,
Hungary, Romanian
used for pre-selection and optimization of roof purlins produced by
Ruukki, developed for the use of PURCHASING and SALES PERSONNEL who
are not professional building designers.
- Panel and liner tray - Pre-selection software - 29,90€
- Windows - Languages: Finnish, English, Swedish, Polish, Czech, Slovak,
Hungary, Romanian
used for pre-selection and optimization of metal faced sandwich panels
made by Ruukki
link : software.ruukki.com
www.steelbizfrance.com, French portal for steel construction professionals
Language : french
Les outils ne doivent être utilisés que par des utilisateurs
professionnels, qui en maîtrisent l'usage et auront la capacité
d'en interpréter les résultats.
Formulaires de calcul
Formulaire "Poutres" : Formulaire de calcul des poutres
isostatiques ou hyperstatiques à une seule travée sous différents
cas de chargement, réactions d'appuis, déformations et diagrammes
de sollicitations. Utiliser
Contraintes de contact : Evaluation de la surface de contact
et de la pression maximale dans la zone de contact pour quelques cas
courants. Utiliser
Formulaire "Portiques" : Formulaire de calcul des
portiques simples articulés ou encastrés en pied sous
différents cas de chargement, réactions d'appuis, déformations
et diagrammes de sollicitations. Utiliser
Période de vibration propre : Evaluation de la période
de vibration propre de poutres d'inertie constante portant une masse
concentrée ou répartie. Utiliser
Caractéristiques de profils
PrsCarX : Logiciel de détermination des caractéristiques
mécaniques et position des axes neutres (élastique et
plastique) des profils PRS courants en I ou en caisson, mono et bi -
symétriques. Utiliser
CameliaX : Logiciel de calcul des caractéristiques mécaniques
d'une section linéaire à épaisseur constante. Utiliser
Profils laminés du commerce : Caractéristiques
géométriques et mécaniques des profilés
du commerce : profils standards européens (IPE, HE, U, cornières)
et profils étrangers (anglais, américains, japonais).
Utiliser
Utilitaires EUROCODES
SoliveX : Logiciel de vérification d'une solive de plancher
isostatique selon l'EN 1993-1-1. Les solives sont isostatiques. Elles
peuvent être en laminés ou en P.R.S et sont soumises à
des charges uniformément réparties ou concentrées.
Utiliser
PomiX : Logiciel de vérification des poteaux mixtes simplement
comprimés ou comprimés et fléchis (flexion monoaxiale)
selon la méthode simplifiée de l'EN 1994-1-1. Utiliser
PlatineX : Logiciel de calcul des assemblages par platine d'about
selon EN 1993-1-8:2005. Utiliser
Utilitaires CM66 & NF P 22.xxx
DbCorniereX : Logiciel de calcul des assemblages de poutres,
réalisés par double cornière, avec ou sans grugeage,
et transmettant un effort tranchant (par exemple : attache d'extrémité
d'une solive de plancher). Utiliser
PotArtX : Logiciel de calcul des pieds de poteaux articulés
en acier sur massif béton. Les bêches peuvent être
réalisées en profilé ou en cornière ou être
absentes. Les tiges peuvent être droites, avec crosse ou plaque.
Utiliser
SoudiX : Logiciel de vérification en résistance
d'assemblages soudés types : cordons simples (frontaux, latéraux,
oblique) - ensembles de cordons frontaux et latéraux (3 ou 4)
- attache de sections (I, H, T, U, plat, cornière, tube) - raidisseurs.Utiliser
460X3 : Logiciel de calcul des assemblages par platine d'about
et boulons à serrage contrôlé selon l'article 9
de la norme française NF P 22-460 de Juin 1979. Utiliser
430X2 : Logiciel de calcul des assemblages par platine d'about
et boulons ordinaires selon les "recommandations pour le choix
et les conditions d'utilisation des boulons précontraints et
non précontraints" (Revue CM n°4-1997). Utiliser
>
www.steelbizfrance.com
Terasrakenneyhdistys, Finnish Constructional Steelwork Association:
Software for Design of Steel and Composite Structures on Finnish Constructional
Steelwork Association website.
• WinRami, 2D Frame and truss design
• WQBeam, Intermediate steel floor beam design
• Section - Cold formed hollow section and welded I section design
• JOINT - Connection design software
• Rapalkki - Hoist Girder design software (only in finnish)
• ColGraph - Hollow Section Composite Columnn capacity tables
• ComBeam - Composite beam design software
• ComCol - Composite column design software
• ComSlab - Composite slab design software
• Poimu - Corrugated thin sheet profile design
• ProfBeam - Cold formed open section design
• Orsi - Roof and wall purlin design
• TrayPan - Ruukki liner tray and Panel design.
http://www.terasrakenneyhdistys.fi
(go to the english version from the menu on the left).
|