Eurocodes
P301–
Design of Steel Structures
This book details the fundamental concepts of Eurocode 3, Part 1-1: General rules and rules for buildings and their practical application. Following a discussion of the Eurocode 3 basis of design, including the principles of reliability management and the limit state approach, the steel material standards and their use under Eurocode 3 are detailed. Structural analysis and modelling are presented in a chapter that will assist the design engineer in the first stages of design. This is followed by a major chapter that provides the design criteria and approaches for the various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements, making for a unique presentation of theory into practice. The following chapters expand on the principles and applications of elastic and plastic design of steel structures. Throughout the book, many design examples are presented that represent a significant part of the manual. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.
Authors: Luís Simões da Silva, Rui Simões and
Helena Gervásio
Publisher: ECCS | Ernst & Sohn
Year 2010, Price 70€
>
view the Preface and Table of contents of the book
Available
internationally via www.eccspublications.eu
Order
123 - Worked examples according to EN1993-1-3
Authors
ECCS TC7 TWG 7.5
Eurocode 3, Part 1.3, Supplementary rules for cold formed members and
sheeting (EN 1993-1-3:2004) has been published. This standard replaces
pre-standard ENV 1993-1-3:1996 and contains updates and revisions to
the pre-standard ENV 1993-1-3.
This new publication replaces ECCS document No. 114. The examples have
been updated following the provisions given in EN 1993-1-3. Some new
examples have been also included. These examples show applicability
of design provisions in EN 1993-1-3 in practice. They also help in interpretation
of the guidance given in the code.
Written in English, 235 pages.
Price: 30€
Commentary and worked examples to EN 1993-1-5 "plated structural
elements"
B. Johansson, R. Maquoi, G. Sedlacek, C. Müller, D. Beg
Background documents in support to the implementation, harmonization
and further development of the Eurocodes
joint Report, prepared under the JRC – ECCS cooperation agreement
for the evolution of Eurocode 3 (programme of CEN / TC 250)
First Edition, October 2007
EUR 22898 EN - 2007
Get Free PDF - Das PDF kostenlos bekommen - obtenir le pdf gratuit
N° 114: Preliminary Worked Examples according to Eurocode 3 part
1.3
ISBN
92-9147-000-61
Authors ECCS, Publisher ECCS, Year 2000, 200 pgs, Written in English
Resume: To check the workability and accuracy of ENV 1993-1-3 it has been decided by ECCS TC7 to prepare a number of calculations related to cold-formed structures. The publication of these calculations provides the designing engineers a number of examples and shows how to handle the different items in ENV 1993-1-3.
N° 113: Design Tables and Graphs for Composite Beams to Eurocode
4 (Includes CD-ROM)
English, June 2001, 41 pp
The
publication presents design aids for composite beams using standard
hot rolled steel sections and composite floor slabs comprising profiled
steel decking and concrete. The steel beams may be either IPE or HE
sections, or UB, or UC sections in their respective steel grades, and
using a partial safety factor for steel of 1.1 in most cases. The shear
connectors are welded studs of typically 19 or 22 mm diameter. The design
principles and application rules follow ENV 1994-1-1: Eurocode 4.The
design aids take the form of indirect design tables giving member resistances
and stiffnesses, and direct design tables giving the load-span capabilities
of each beam size. The direct tables address the design of simply supported
beams as secondary beams, or as primary beam supporting other beams.
Graphs are presented for the design of simply supported beams using
IPE and HE sections, including also partially encased beams.Additional
information is provided on fire protection of composite beams, including
partially encased beams. In this case, the approximate amount of reinforcement
is given. Worked examples illustrate how to use the design tables and
graphs in practice. A total of 70 tables and 9 graphs is presented,
which cover most design cases.Please note that, in this book, reference
is made to publication n° 72.
N° 96: Design Handbook for Braced Composite Steel-Concrete Buildings
According to Eurocode 4
English, 2000
The
publication n° 96 is intended to be a design aid in supplement to
the European Pre-standard ENV 1994-1-1:1992 (always with references
to the latter). It provides simplified guidance and facilitates the
use of Eurocode 4 for the design of composite structures in common practice:
braced composite steel-concrete structures. This handbook, less formal
and more user-friendly than Eurocode 4, contains additional explanations
on design principles, application rules and, about usual design results.
The main design formulas and rules, extracted from Eurocode 4 - Part
1.1, are dealing with elastic global analysis of buildings or similar
structures and with checks of structural members at ultimate and serviceability
limit states.
Also available in French, German, Dutch, Italian, Spanish
N° 93: Executing Steel Structures to Eurocodes 3 and 4: Guide to
ENV 1090 - part 1
English, 1998, 49pp
This
publication has been prepared to introduce specifiers and constructors
to the use of ENV 1090-1 for the execution of steel structures.
Chapter 1- General, deals with the scope and context for use of the
pre-standard.
Chapter 2- Technical Requirements, deals with the technical content
of ENV 1090-1, with twelve sub-sections that cover the corresponding
clauses of the Pre-standard and their respective annexes.
Chapter 3- The Project Specification, deals with the interface between
the specifier and the constructor. The transfer of information between
a purchaser (or the engineer acting as the purchaser's agent) and the
constructor is set out in the project specification, and Chapter 4 concludes
with comments and recommendations concerning each item of relevant information
needed in the project specification.
N° 85: Design Handbook for Braced or Non-Sway Steel Buildings According
to Eurocode 3
English, 191pp, edition 1996
The
present publication is intended to be a design aid in supplement to
the complete document Eurocode 3 - Part 1.1 in order to facilitate the
use of Eurocode 3 for the design of such steel structures which are
usual in common practice : braced or non-sway steel structures.
Therefore the "Design Handbook to EC3 for Simple Buildings"
presents the main design formulas and rules extracted from Eurocode
3 - Part 1.1, which are needed to deal with:
- elastic global analysis of buildings and similar structures in steel
- checks of structural members and connections at limit states
- in case of braced or non-sway structures
-according to the European standard Eurocode 3 - Part 1.1 (ENV 1993-1-1)
Also available in French, German, Spanish, Italian and Dutch
N° 72: Composite Beams and Columns to Eurocode 4
English, September 1993, 185pp
This
publication presents useful information and worked examples on the design
of composite beams and columns to Eurocode 4 "Design of composite
Steel and concrete structures" (ENV 1994-1-1). The information
is given in the form of a concise guide on the relevant aspects of Eurocode
4 that affect the design of composite beams and columns normally encountered
in general building construction.
Each section of the publication reviews the design principles, gives
design formulae and makes cross-reference to the clauses of Eurocode
4. Information on the design of composite slabs is also given, although
the publication focuses on the influence of the slab on the design of
the composite beam.
Design aids are also presented to assist in selecting the size of steel
beams to be used in some applications. Worked examples cover the design
of composite beams with full and partial shear connection, continuous
beams, and composite columns.
Get Free PDF - Das PDF kostenlos bekommen - obtenir le pdf gratuit
N° 71: Examples to Eurocode 3
English, May 1993, 100pp
The
Design Examples to EC3/1 and E-EC3 have been prepared by the ECCS-Advisory
Committee 5 as a design aid in supplement to the complete EC3/1 to facilitate
the use of EC3/1 for the design of steel buildings in the ENV-period.
They only contain examples to EC3/1 and E-EC3 that are likely to be
needed for daily practical design work.
References to EC3/1 are given.
The publication contains three parts and an appendix:
Part 1 : Load combination, methods of analysis, frame analysis, bracing
system analysis;
Part 2 Members in compression, members in bending, combined loading-bending
and compression, load introduction.
Part 3 : Bolted connections, welded connections, pin connections.
Appendix A : Tabled reduction factors for buckling curves ao, a, b,
c, d.
N° 65: Essentials of Eurocode 3: Design Manual for Steel Structures
in Building
English, July 1991, 65pp
Provides
a means of simple application for daily practical work. It consists
of an excerpt from complete Eurocode 3, Part I is "deemed to satisfy"
those requirements. It is followed by "Design Aids" and "Worked
Examples". The combination of these publications is intended to
give the simplest means of publication of Eurocode 3, Part I with the
objective of promoting the effective use of structural steelwork.